Madhatter's Magnificent Market

Before the arrival of electric lighting, people used a variety of tricks for navigating their neighborhoods at night. In The Downs, an area near the English Channel, patches of chalky soil were used as beacons known as down lanterns. In wooded areas, bark was strategically cut from trees to expose the lighter wood underneath. However, on most clear nights, the moon and starlight were strong enough to navigate at night.

In the 18th century, candles and oil lamps illuminated many light fixtures in most homes and businesses. These early sources of illumination emitted a weak light, smoked, and gave off foul odors. They were also dangerous and required constant attention.

Wealthy aristocrats used beeswax and spermaceti candles to light up their lavish households. The middle class used cheap tallow candles while the poor used rushlights.  Rushlights are makeshift candles made from reeds dipped in animal or vegetable fat and ignited, which burn for a short time.

During the 19th century, gas lighting replaced candles and oil lamps in many homes, businesses, and streets. Gas lamps produced a brighter and more efficient illumination. They also cost 75 percent less than candles or oil lamps, and were easier and safer to operate.

By the 1850s, most city streets in the United States and Europe were illuminated by gas lamps. Gas lighting is credited with reducing crime rates and increasing literacy in many areas. As electricity became more widespread during the turn of the century, gas lamps were replaced by incandescent lamps in streets, businesses, and theaters.

The First Electric Lights

In 1802, Sir Humphry Davy, an English physician, created the first electric light by passing a current through a platinum strip. The glow did not last long, but it marked the beginning of the history of light bulbs. In 1809, Davy demonstrated the first carbon arc lamp at the Royal Institute in London by connecting two wires to a battery and attaching a charcoal strip between the other ends of the wires. While the scientific community and the public raved about the demonstration, the arc lamp burned too brightly and consumed a large amount of current, which quickly drained the battery and rendered the lamp impractical for commercial development and production. Several decades passed before electric generators made arc lamps practical for street and theater lighting.

In 1875, Pavel Nikolayevich Yablochkov, a Russian electrical engineer and inventor, developed the first practical arc lamp known as the “Yablochkov Candle.” Yablochkov used two parallel carbon rods to extend the life of the battery. During the Paris World’s Fair of 1878, about 64 Yablochkov candles were installed on the Avenue de l’Opéra, Plade du Théâtre Francais and around the Place de l’Opéra, earning the city the famous nickname of “City of Lights.” The success of the exhibition was influential in bringing electric lighting to the masses, and arc lamps were soon installed on many streets in the United States and Europe.

Arc lamps produced an intense, bright light that was ideal for illuminating streets and outdoor spaces, but the dazzling lights were not suitable for indoor use. During the late 1880s, Thomas A. Edison and many other inventors began to experiment with incandescent lamps in search for a reliable and economical form of indoor lighting. Arc lamps were used for searchlights, lighthouses, stadium lights, film production lights, film projector lamps, and other high-intensity lighting applications until the 1980s when advancements in short-arc lamps made them obsolete.

The First Incandescent Light BulbsIncandescent light bulbs use electricity to heat a carbon or metal base filament inside a glass bulb until it becomes hot and emits a radiant glow. A vacuum keeps the filament from burning up too quickly and blackening the interior of the glass bulb. Many of the first incandescent light bulbs faced the same challenges – a poor vacuum design, inferior and/or expensive filaments, and bulb blackening. However, these early experiments were pivotal in the development of the first commercially viable incandescent light bulb.

In 1841, Frederick de Moleyns received the first patent for an incandescent lamp in England. The lamp used a glass bulb, a partial vacuum and powdered charcoal between two platinum filaments to emit light. However, the lamp was not efficient enough for commercial use. The vacuum’s poor design caused the bulb to darken at the top and block light output, and the platinum filaments were too expensive.

In 1865, German chemist Hermann Sprengel invented a mercury-vacuum pump, known as the Sprengel pump, that streamed mercury through a reservoir, T-junction and down a duct to evacuate the air from the vacuum and steadily lower the pressure. Inventors developing incandescent lamps quickly adopted the invention because it helped to preserve the filament inside the bulb.

In 1874, Henry Woodward and Mathew Evans filed a patent for an incandescent light bulb with a carbon filament in Canada and the United States. The light bulbs, although they worked properly, sold poorly. They sold their patent to Thomas Edison in 1879.

In 1878, William E. Sawyer and Albion Man received the first U.S. patent for “improvement of Electric Lights.” The lamp consisted of a nitrogen-filled globe with a carbon conductor, supported by large zigzagging radiators. The lamp’s rigid design prevented the carbon conductor from expanding and contracting, causing the lamp to break frequently. The first 

Who Invented The Incandescent Light Bulb: Edison v. Swan

In many textbooks, Thomas A. Edison is solely credited with inventing the modern incandescent light bulb after 10,000 attempts. Edison, an undisputed visionary, was not the only one competing to develop the first commercial incandescent bulb. Countless chemists, physicists, and inventors clamored for the honor and substantial payoff.

In 1878, a young Edison stated that he could create a safer, cheaper, and more reliable incandescent light to replace existing gas lights in just six weeks. The announcement caused gas company stocks to plummet. At 31 years old, Edison had already earned the nickname of the Wizard of Menlo Park for his innovation and inventions, including the stock ticker, quadruplex telegraph and phonograph. He gathered financial backing and assembled a team of 14 engineers, machinists, and physicists known as the “muckers” in Menlo Park, NJ, to research and develop an incandescent light bulb. Notable team members included American mathematician and physicist Francis Upton, American mechanic Charles Batchelor, and Swiss-born machinist John Kruesi.

From Edison’s Creations

During this time, Edison and his team created several incandescent light bulb prototypes, including a lamp with a platinum filament, which oxidized slowly and had a high melting point. To prevent the filament from overheating and burning out, a problem that plagued earlier inventors, he created a regulating system that intermittently diverted the current away from the filament, permitting it to cool. The system was difficult to manufacture and operate, and the light bulb itself would shut off every few minutes, rendering the lamp impractical for commercial development.

At the same time, Sir Joseph Wilson Swan, an English chemist and physicist, was independently working on an incandescent light bulb with a carbon filament. Swan began working on the incandescent bulb three decades earlier, but like other early inventors, he lacked a reliable vacuum and a suitable electric source to create a practical light bulb. In late 1878, he reported to the Newcastle Chemical Society that he had created a working incandescent lamp and he received a UK patent that same year. In February 1879, Swan demonstrated a working lamp during a lecture at the Newcastle Literary and Philosophical Society. His lamp design included an enclosed bulb with the air removed, platinum lead wires, and light-emitting carbon element.

To Swan’s Improvements

Swan’s original incandescent lamp, while functional, was not practical for real-world use. The carbon rod had low electrical resistance and required a large amount of current to heat up and make the filament glow, which meant that the electric conductors to the lamp had to be short or unreasonably thick. The rod also released gasses when the lamp was turned on and dark soot quickly accumulated inside the glass, blocking light output. Swan improved his design and eventually established his own electric lighting company, The Swan Electric Light Company, in 1881.

The halogen light bulb was first introduced in 1959 by GE. These light bulbs, while an adaptation of incandescent light bulbs, reduced the uneven evaporation of the filament and darkening of the envelope by filling the lamp with halogen gas rather than an inert gas. Halogen bulbs also lasted longer with an average life of 1,500 hours, and consumed 15 percent less energy.

Despite numerous improvements over the years, modern incandescent bulbs remained inefficient. About ten percent of the electric power supplied to an incandescent light bulb is actually converted into visible light. The remaining energy is wasted as heat.

Energy Crisis Inspires Energy Efficient Lighting

The U.S. oil crisis in the 1970s sparked interest in renewable sources of energy and energy-efficient residential lighting. Lighting engineers began to adapt fluorescent lighting for residential use. Fluorescent lamps had been in use since the 1930s, but they were mainly used for commercial and industrial lighting.

In 1976, Edward E. Hammer, an engineer at GE, bent a fluorescent tube into a spiral shape, creating the first compact fluorescent light bulb (CFL). GE initially shelved the design because the machinery needed to mass produce the light bulbs was too expensive at the time. The design was leaked and shortly thereafter, other manufacturers began to produce the light bulb.

During the mid-1980s, the first CFLs began to hit the market starting at $25 to $35. Consumers were hesitant to embrace the new lighting technology due to its price, size, and performance. Early CFLs were big and bulky, and did not fit in many light fixtures. They light bulbs also emitted a low light and performed inconsistently.

Subsequent improvements in CFL prices, performance, and efficiency made them the ideal choice for energy conscious homeowners and business owners. Today, CFLs use 75 percent less energy than traditional incandescent light bulbs. They also have an average life 10,000 hours, about ten times longer than the average life of an incandescent bulb, and cost as little as $1.71 per bulb.

LEDs Light Up the Future

Light emitting diode (LEDs) are one of the fastest growing lighting technologies today. LEDs are a type of solid-state lighting that uses semiconductors to convert electricity into visible light. LEDs emit light in a specific direction, minimizing the needs for reflectors and diffusers that can trap light, and absorb the heat produced via a heat sink. In 1961, James R. “Bob” Biard and Gary Pittman at Texas Instruments discovered the first light-emitting diode while attempting to create a laser diode.

The following year, Nick Holonyak Jr. at GE developed the first visible red diode. In 1972, M. George Craford developed the first yellow diode. Craford, a graduate student of Holonyak, also improved the red diode and developed red-orange diode. The same year, Herbert Maruska and Jacques Pankove developed the violet diode. As companies improved red diodes and their production, they began to appear as indicator lights and calculator displays during the late 1970s.

During the 1990s, researchers focused their efforts on increasing the energy efficiency of light-emitting diodes. In 1993, Shuji Nakamura developed the first bright blue light-emitting diode, the last component needed to create bright white LED light. Shortly thereafter, scientist experimented with blue, red, and green diodes by coating them with phosphors to make them appear white.

During the early 2000s, the first LED light bulbs hit the market. In 2008, the U.S. Department of Energy announced the L Prize Competition, a competition designed to push the development of ultra-efficient solid-state lighting products. In late 2009, Philips Lighting North America entered its LED bulb in the competition’s 60-watt replacement category. The Department of Energy estimates that at the time, 971 million 60-watt incandescent light bulbs were in use. In 2011, Philips Lighting won the L Prize 60-watt replacement category after a rigorous review process. The winning light bulb cost $40 and was reported to last more than 27 years.

Since 2008, the price of LED bulbs has decreased more than 85 percent, making them an affordable choice for illuminating homes, businesses, and public spaces. LED bulbs are six to seven times more efficient than incandescent light bulbs, cut energy consumption by 80 percent, and last 25 times longer than incandescent bulbs. In 2012, 49 million LED products were installed in the U.S., saving about $675 million in annual energy costs.

The Legacy of the Modern Light Bulb

The modern-day light bulb not only revolutionized home and work life, it also influenced urban development and accelerated the economy. Many people migrated from rural areas to the city in search for work. Late-night restaurants, businesses, and sporting events provided new employment opportunities and entertainment. Electric light bulbs created the practice of shift work, increased worker efficiency, and allowed for greater productivity. They also improved working conditions, eliminated heat and pollution caused by gas lighting, and reduced fire hazards. The cost of electricity was offset by the reduction of insurance premiums. Light bulbs changed how products were marketed to consumers and gave rise to bright billboards and signs.

Special Thanks for the following resource: